Differences

This shows you the differences between two versions of the page.

--- batocera-and-crt [2024/09/07 10:04] – move RPi portions to a new page atari
+++ batocera-and-crt [2025/07/23 14:06] (current) – [Connecting the PC to a CRT display] rion
@@ Line 1: / Line 1: @@
 ====== Batocera native CRT output ======
-<WRAP center round info>
+<WRAP center round alert>
-This guide only applies to Batocera **v32** on the x86_64. [[:batocera-and-crt-rpi|CRT on Raspberry Pi]] has its own page. For **v30**/**v31** and on x86, refer to the [[:batocera-and-crt-old|legacy guide]]. This article is also not for the faint of heart. Word-count: about 9k.
+🚫 **This page is outdated and should no longer be used.**
+Please refer to the **[[https://github.com/ZFEbHVUE/Batocera-CRT-Script/wiki|Batocera CRT Script – Official Wiki]]** instead.
+🛠 An **automated CRT setup script** is now available and should be used to configure native CRT output on the latest x86_64 Batocera builds.
+⚠️ Only refer to this page if you’re troubleshooting legacy setups.
+For all current installations, follow the GitHub Wiki and script instructions.
 </WRAP>
-<WRAP center round tip>
-[[https://github.com/ZFEbHVUE/Build-CRT-15KHz-Batocera-V35|An automated script]] has been developed which can be used to configure and activate CRT capabilities for the latest x86_64 Batocera version. Use it after reading through this guide at least once to understand its usage.
+<WRAP center round info>
+This guide only applies to Batocera **v32** on the x86_64. [[:batocera-and-crt-rpi|CRT on Raspberry Pi]] has its own page. For **v30**/**v31** and on x86, refer to the [[:batocera-and-crt-old|legacy guide]]. This article is also not for the faint of heart. Word-count: about 9k.
 </WRAP>
@@ Line 160: / Line 167: @@
 <WRAP center round info>
-If you are in a situation where you must use an active adapter, the CableDeconn DP to VGA adapter is one of the best options. It uses a repurposed Realtek RTD 2168 audio chip for its conversion, which doesn't rely on an oscillating crystal (no out-of-sync timing it has to account for) and no automatic deinterlacer (pretty much standard for all other active adapters, this will ruin your signal's quality).
+If you are in a situation where you must use an active adapter, the CableDeconn DP to VGA adapter is one of the best options. It uses a repurposed Realtek RTD 2166 audio chip for its conversion, which doesn't rely on an oscillating crystal (no out-of-sync timing it has to account for) and no automatic deinterlacer (pretty much standard for all other active adapters, this will ruin your signal's quality).
 </WRAP>
@@ Line 191: / Line 198: @@
 Once everything is safe, you can turn on your Batocera machine. If you'd like to edit files using the Batocera machine itself, you can hook up a secondary digital display in the meantime. If you have multiple ports and use another port, then you'll not be able to do this once you disable the other port outputs in the upcoming section. If you have a modern digital display that can handle older standard signals over older standards cables without blowing up (such as a LCD monitor with both HDMI and VGA ports), you can use that in place of your CRT until everything is configured correctly for it.
+<WRAP center round alert>
+🚫 **This page is outdated and should no longer be used.**
+Please refer to the **[[https://github.com/ZFEbHVUE/Batocera-CRT-Script/wiki|Batocera CRT Script – Official Wiki]]** instead.
+🛠 An **automated CRT setup script** is now available and should be used to configure native CRT output on the latest x86_64 Batocera builds.
+⚠️ Only refer to this page if you’re troubleshooting legacy setups.
+For all current installations, follow the GitHub Wiki and script instructions.
+</WRAP>
 ===== Editing the configuration files =====