Differences

This shows you the differences between two versions of the page.

--- batocera-and-crt [2024/11/27 09:12] – [Connecting the PC to a CRT display] rion
+++ batocera-and-crt [2025/07/23 14:06] (current) – [Connecting the PC to a CRT display] rion
@@ Line 2: / Line 2: @@
 <WRAP center round alert>
-[[https://github.com/ZFEbHVUE/Batocera-CRT-Script|An automated script]] has been developed which shall be used to configure and activate CRT capabilities for the latest x86_64 Batocera version. Use it after reading through this guide at least once to understand its usage.
+🚫 **This page is outdated and should no longer be used.**
+Please refer to the **[[https://github.com/ZFEbHVUE/Batocera-CRT-Script/wiki|Batocera CRT Script – Official Wiki]]** instead.
+🛠 An **automated CRT setup script** is now available and should be used to configure native CRT output on the latest x86_64 Batocera builds.
+⚠️ Only refer to this page if you’re troubleshooting legacy setups.
+For all current installations, follow the GitHub Wiki and script instructions.
 </WRAP>
@@ Line 161: / Line 167: @@
 <WRAP center round info>
-If you are in a situation where you must use an active adapter, the CableDeconn DP to VGA adapter is one of the best options. It uses a repurposed Realtek RTD 2168 audio chip for its conversion, which doesn't rely on an oscillating crystal (no out-of-sync timing it has to account for) and no automatic deinterlacer (pretty much standard for all other active adapters, this will ruin your signal's quality).
+If you are in a situation where you must use an active adapter, the CableDeconn DP to VGA adapter is one of the best options. It uses a repurposed Realtek RTD 2166 audio chip for its conversion, which doesn't rely on an oscillating crystal (no out-of-sync timing it has to account for) and no automatic deinterlacer (pretty much standard for all other active adapters, this will ruin your signal's quality).
 </WRAP>
@@ Line 193: / Line 199: @@
 <WRAP center round alert>
-[[https://github.com/ZFEbHVUE/Batocera-CRT-Script|An automated script]] has been developed which shall be used to configure and activate CRT capabilities for the latest x86_64 Batocera version. Use it after reading through this guide at least once to understand its usage.
+🚫 **This page is outdated and should no longer be used.**
+Please refer to the **[[https://github.com/ZFEbHVUE/Batocera-CRT-Script/wiki|Batocera CRT Script – Official Wiki]]** instead.
+🛠 An **automated CRT setup script** is now available and should be used to configure native CRT output on the latest x86_64 Batocera builds.
+⚠️ Only refer to this page if you’re troubleshooting legacy setups.
+For all current installations, follow the GitHub Wiki and script instructions.
 </WRAP>
 ===== Editing the configuration files =====