Differences

This shows you the differences between two versions of the page.

--- choose_a_single_board_computer [2025/01/09 18:33] – Added information about the Orange Pi 5/ Orange Pi 5B isolox
+++ choose_a_single_board_computer [2025/12/24 11:19] (current) – [Radxa Dragon Q6A] ektor5
@@ Line 614: / Line 614: @@
 {{ :hardware:orangepi5.png?400|}}
-A board starting at around 65$ USD powered by the RK3588S with variations with 4GB/8GB/16GB/or 32GB of RAM. Some variats can also include built on WiFi/Bluetooth and M.2 PCI 2.0 port. It can be compared as a more powerful alternative to the Rasberry Pi 5
+A board starting at around 65$ USD powered by the RK3588S with variations with 4GB/8GB/16GB/or 32GB of RAM. Some variants can also include WiFi/Bluetooth, as well as a M.2 PCIe 2.0 port. It can be compared as a more powerful alternative to the Raspberry Pi 5
 === Limitations ===
@@ Line 675: / Line 675: @@
 FIXME
+==== Radxa Dragon Q6A ====
+FIXME
+Add image: https://docs.radxa.com/en/img/dragon/q6a/dragon-q6a-view.webp
+The Radxa Dragon Q6A is a single board computer with RPi-compatible form factor with Qualcomm® QCS6490 processor, designed specifically for industrial IoT, edge AI, and smart devices.
+<WRAP center round tip>
+Support for Radxa Dragon Q6A has been merged and will be probably available in next releases.
+  * If you have access to a Radxa Dragon Q6A and are willing to test, please do so and report your results on the Batocera [[https://discord.gg/ndyUKA5|Discord server]].
+  * If you have access to a Radxa Dragon Q6A sample and you know how to develop, please feel free to [[https://wiki.batocera.org/compile_batocera.linux|contribute]] and don't hesitate to reach out to the #developers channel on the Batocera [[https://discord.gg/ndyUKA5|Discord server]].
+</WRAP>
+=== Installation ===
+Make sure you are running the [[https://docs.radxa.com/en/dragon/q6a/download|latest UEFI Firmware]] prior to flashing.
+Flash the output image directly to the Micro-SD card.
+The SBC also features an **eMMC/UFS** slot (needs 4K LBA partitioning) and a **NVMe** slot. Booting on these mediums has not been tested, but they can be used as storage.
+=== Required Accessories ===
+  * Micro-SD card
+  * Power supply (USB-C)
+=== Performance ===
+The Adreno 643 GPU can run smootly PSP and PS1 games, it can also run some Wii games. For intensive loads it may be required some active cooling.
 ===== Beelink TV Boxes ====