Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
hardware:dolphinbar [2022/08/31 04:24] – add inlink atarihardware:dolphinbar [2023/04/18 06:25] (current) – old revision restored (2022/09/22 03:00) atari
Line 87: Line 87:
   * Intended for using just a Wiimote **without** a Nunchuk.   * Intended for using just a Wiimote **without** a Nunchuk.
   * There are two modes, indicated by LEDs **1 + 2** or LEDs **1 + 3** lighting up.   * There are two modes, indicated by LEDs **1 + 2** or LEDs **1 + 3** lighting up.
-  * You can switch mode with ''[HOME]'' + ''[[D-pad Down]]''+  * You can switch mode with ''[HOME]'' + D-pad Down
  
 <code> <code>
Line 118: Line 118:
 In this mode, the ''[-]'' button is mapped to the ''[Esc]'' key, which will exit the emulator. In this mode, the ''[-]'' button is mapped to the ''[Esc]'' key, which will exit the emulator.
 </WRAP> </WRAP>
 +
 +== Mode 3 ==
 +
 +If you use the DolphinBar in **MODE 3**, it allows you to use a Wiimote, Wiimote + Nunchuk, or a Wii Classic Controller as a normal **GameCube** gamepad that you can configure in Batocera like any other pad. Mode 3 will work with all other emulators and can save you if you don't have any other controller. 
 +
 +But, the Wiimote, Wiimote + Nunchuk, and Classic Controller have all different button assignments, even for things that seem obvious like the D-pad. If you plug or unplug a different device, you'll have to make adjustments to your controller configuration stored in Batocera because they have all the same name **HJZ Mayflash Wiimote PC Adapter**.
  
 == Mode 4 == == Mode 4 ==
Line 130: Line 136:
     - On the Wiimote, hold down buttons ''[1]'' + ''[2]''. The LEDs will begin flashing.     - On the Wiimote, hold down buttons ''[1]'' + ''[2]''. The LEDs will begin flashing.
   - Wait until the LEDs stop flashing. Once they do, the Wiimote is connected to the emulated Wii system.   - Wait until the LEDs stop flashing. Once they do, the Wiimote is connected to the emulated Wii system.
- 
-=== Using Wii controllers as regular controllers for other systems with Mode 3 === 
- 
-If you use the DolphinBar in **MODE 3**, it allows you to use a Wiimote, Wiimote + Nunchuk, or a Wii Classic Controller as a normal **GameCube** gamepad that you can configure in Batocera like any other pad. Mode 3 will work with all other emulators and can save you if you don't have any other controller.  
-But, the Wiimote, Wiimote + Nunchuk, and Classic Controller have all different button assignments, even for things that seem obvious like the D-pad. If you plug or unplug a different device, you'll have to make adjustments to your controller configuration stored in Batocera because they have all the same name **HJZ Mayflash Wiimote PC Adapter**. 
  
 ===== Emulator Configuration ===== ===== Emulator Configuration =====
  • hardware/dolphinbar.1661919898.txt.gz
  • Last modified: 4 years ago
  • by atari