Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
| hardware:dolphinbar [2023/04/08 03:41] – [Wiimote via a DolphinBar] New beta firmware with a lightgun solution maioni | hardware:dolphinbar [2023/04/18 06:25] (current) – old revision restored (2022/09/22 03:00) atari | ||
|---|---|---|---|
| Line 42: | Line 42: | ||
| <WRAP center round important> | <WRAP center round important> | ||
| - | Due to problems of the IR LEDs burning out from staying on too long, the v5 firmware released in late 2015 turns off the Mayflash bar's IR LED lights when they are not needed, such as when no Wiimotes are connected or when the Mayflash bar is in a mode where the pointer cannot be used. But unlike the old problematic sensor bars that turned off after a set time, the Mayflash bar knows when the Wiimotes are actively being used, so it presents no problems. [[https:// | + | Due to problems of the IR LEDs burning out from staying on too long, the v5 firmware released in late 2015 turns off the Mayflash bar's IR LED lights when they are not needed, such as when no Wiimotes are connected or when the Mayflash bar is in a mode where the pointer cannot be used. But unlike the old problematic sensor bars that turned off after a set time, the Mayflash bar knows when the Wiimotes are actively being used, so it presents no problems. [[https:// |
| </ | </ | ||
| - | New beta firmware with a lightgun solution: https:// | ||
| ==== Setting up the Mayflash bar ==== | ==== Setting up the Mayflash bar ==== | ||
- hardware/dolphinbar.1680925274.txt.gz
- Last modified: 3 years ago
- by maioni