Differences

This shows you the differences between two versions of the page.

--- install_batocera [2023/10/25 11:53] – remove unneccesary step atari
+++ install_batocera [2023/11/12 05:22] (current) – add info about secure boot jumpscare atari
@@ Line 35: / Line 35: @@
     - If on a recent PC using an x86/x86_64 build, you may need to [[#bios_settings_(if_batocera_fails_to_boot)|disable Secure Boot in your BIOS settings]].
     - If on a PC, you may need to enter the boot selection menu with ''[F10]'', ''[F11]'' or ''[F12]'' and select the Batocera drive. UEFI is preferred if available, but not necessary. {{ typical-boot-menu.jpg?nolink&323 |Here my Batocera USB stick simply appears as "Generic STORAGE DEVICE"}}
-  - Boot the Batocera drive and let it automatically expand the userdata partition (could take a few seconds or a few minutes, depending on your drive size/speed), it will reboot again once done. Don't turn off the device during this step or you might risk data corruption! {{ :batocera_resize_partition.jpg?540 |}}
+  - Boot the Batocera drive and let it automatically expand the userdata partition (could take a few seconds or a few minutes, depending on your drive size/speed), it will reboot again once done. Don't turn off the device during this step or you might risk data corruption! {{ :batocera_resize_partition.jpg?540 |}} <WRAP center round info>
+If instead another blue screen appears saying verification failed this means you are in secure boot mode and have not enrolled Batocera's keys yet. Press ''Enter'' and follow the on-screen prompts to do so, for further info refer to the [[:secureboot|the secure boot page]]. {{secure_boot_x64_-_2_-_error_verification_failed_0x1a_security_violation_-_screenshot_2023-10-20_121355.png?w=540}} {{tpm_1_boot_option_restoration.jpg?w=600}}
+</WRAP>
   - Enjoy! =) {{ https://batocera.org/images/blog/Pictures/Version_29/output001.png?nolink&540 |Of course, your installation is probably in English.}}