Differences

This shows you the differences between two versions of the page.

--- hardware:gt_king [2022/08/11 23:28] – Minor update for GT King lbrpdx
+++ hardware:gt_king [2024/08/02 16:26] (current) – Precisions on Batocera 40. lbrpdx
@@ Line 6: / Line 6: @@
 {{ :beelink_gt_king_pro.jpg?w=300 |}}
+===== Batocera 40 =====
+Like most other supported hardware platforms, you can just burn Batocera on a SDCard, and boot from there.
+If you boot your GTKing on Android, you will have a menu to select boot on SDcard at the next boot.
+Note: Batocera 40 supports wifi and bluetooth on GTKing (this has been a long struggle with previous versions).
+===== Earlier versions of Batocera (36 and earlier) =====
 There are multiple ways to do this. It is advisable to already be extremely familiar with flashing Android firmwares onto ARM-based TV boxes, as a lot can go wrong and it's very easy to end up with a bricked device. Be weary.
@@ Line 13: / Line 23: @@
 </WRAP>
-===== Method 1: Flash using the GT King itself booted into CoreElec or EmuElec =====
+==== Method 1: Flash using the GT King itself booted into CoreElec or EmuElec ====
 The GT King/King Pro comes with an 8GB SD card. It is recommended to throw this out and buy a new SD card that's at least 16GB for use with Batocera, as that satisfies the minimum size requirements if you need to use the card itself for Batocera. It may not be required, depending on your box. It is possible to flash over the firmware from the old card to the new one if desired, but here we will be using CoreElec (for the GT King Pro) or EmuElec (shipped with the GT King).