Differences

This shows you the differences between two versions of the page.

--- openabl [2026/10/21 18:47] – nadenislamarre
+++ openabl [2026/10/21 20:35] (current) – nadenislamarre
@@ Line 21: / Line 21: @@
   - Flash batocera.linux on a sdcard
   - Start Android
-  - Insert the sdcard
+  - Download and extract openabl zip
-  - Find the menu to execute the scard backup_and_flash.sh script as root
+  - Find the menu to execute the backup_and_flash.sh script as root
   - Reboot the device and go in the OpenABL menu
   - Configure the device model
   - Configure to boot on linux
+  - Insert the sdcard
   - Play batocera.linux
@@ Line 36: / Line 37: @@
 Press the power button to start Android.
-=== Insert the sdcard ===
+=== Download and extract openabl zip ===
-Insert the batocera.linux sdcard into the device.
+From Android, go on https://batocera.org/openabl and download the zip file according to your board.
+| Device           ^ Android menu ^
+^ Mangmi Air Y     | sm6115.zip |
+^ Mangmi Air Y Pro | xxx |
+From Android, extract the zip at the top of the disk
+  * Download file in the download directory
+{{::openablzip_downloaded.jpg?350|}}
+  * Open the zip file to see its content
+{{::openablzip_opened.jpg?350|}}
+  * Select the directory inside and press extract to...
+{{::openablzip_dirselected.jpg?350|}}
+  * Extrat the directory
+{{::openablzip_dirextract.jpg?350|}}
+  * Choose the top of the disk as target (Air Y disk on Air Y for example)
+{{::openablzip_dirchoose.jpg?350|}}
+  * As result, you've the folder extracted at the top of the disk
+{{::openablzip_unzipped.jpg?350|}}
+  * And inside the folder, you should see 3 files
+{{::openablzip_unzippedfiles.jpg?350|}}
+=== Find the menu to execute the backup_and_flash.sh script as root ===
-=== Find the menu to execute the scard backup_and_flash.sh script as root ===
 This part is specific to each device.
+| Device           ^ Android menu ^
+^ Mangmi Air Y     | Settings -> Handheld Settings -> Advanced -> Run Script as Root |
+^ Mangmi Air Y Pro | Settings -> Handheld Settings -> Advanced -> Run Script as Root |
+  - Go in the Execute script as root menu.
+  - Choose the script backup_and_flash.sh that is in the folder that you just extracted at the top of the disk
+  - Validate the execution
 === Reboot the device and go in the OpenABL menu ===
 From Android, shutdown the device.
 Then, keep the volume down button pressed and press power.
+Note: on the Mangmi Air Y and Air Y Pro, the volume down button is the button under the volume wheel.
 === Configure the device model ===
@@ Line 59: / Line 99: @@
 === Configure to boot on linux ===
+In the OpenAbl menu, select linux on Boot mode. Then go on start linux.
+{{::openabl_boot_mode.jpg?300|}}
+=== Insert the sdcard ===
+Insert the batocera.linux sdcard into the device.
 === Play batocera.linux ===
+As usual.
+=== Boot Android ===
+In the OpenAbl menu, select Android on Boot mode. Then go on start Android.