openabl [Batocera.linux

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
OpenABL is a modified bootloader that replaces the stock Android launcher on Qualcomm-based devices.

It adds a visual boot menu right when you turn on your device.

This allows you to easily choose whether to boot into a standard Linux system or Android.

It is required to install it to boot batocera.linux on some devices.

The installation of OpenABL doesn't remove Android. You can install batocera.linux on a sdcard and keep both, Android and batocera.linux on the device.

Project page : https://github.com/OpenHandheldCollective/OpenABL

===== Install OpenABL =====

==== Devices ====
The following devices requires you install OpenABL to boot batocera.linux.
  * Mangmi Air Y
  * Mangmi Air Y Pro

==== Steps ====
  - Flash batocera.linux on a sdcard
  - Start Android
  - Download and extract openabl zip
  - Find the menu to execute the backup_and_flash.sh script as root
  - Reboot the device and go in the OpenABL menu
  - Configure the device model
  - Configure to boot on linux
  - Insert the sdcard
  - Play batocera.linux

==== Detailed steps ====

=== Flash batocera.linux on a sdcard ===
This step is the standard way to flash a batocera.linux sdcard, nothing else special to do.

=== Start Android ===
Press the power button to start Android.

=== Download and extract openabl zip ===
From Android, go on https://batocera.org/openabl and download the zip file according to your board.

| Device           ^ Android menu ^
^ Mangmi Air Y     | sm6115.zip |
^ Mangmi Air Y Pro | xxx |

From Android, extract the zip at the top of the disk

  * Download file in the download directory
{{::openablzip_downloaded.jpg?350|}}

  * Open the zip file to see its content
{{::openablzip_opened.jpg?350|}}

  * Select the directory inside and press extract to...
{{::openablzip_dirselected.jpg?350|}}

  * Extrat the directory
{{::openablzip_dirextract.jpg?350|}}

  * Choose the top of the disk as target (Air Y disk on Air Y for example)
{{::openablzip_dirchoose.jpg?350|}}

  * As result, you've the folder extracted at the top of the disk
{{::openablzip_unzipped.jpg?350|}}

  * And inside the folder, you should see 3 files
{{::openablzip_unzippedfiles.jpg?350|}}

=== Find the menu to execute the backup_and_flash.sh script as root ===

This part is specific to each device.

| Device           ^ Android menu ^
^ Mangmi Air Y     | Settings -> Handheld Settings -> Advanced -> Run Script as Root |
^ Mangmi Air Y Pro | Settings -> Handheld Settings -> Advanced -> Run Script as Root |

  - Go in the Execute script as root menu.
  - Choose the script backup_and_flash.sh that is in the folder that you just extracted at the top of the disk
  - Validate the execution


=== Reboot the device and go in the OpenABL menu ===
From Android, shutdown the device.
Then, keep the volume down button pressed and press power.

Note: on the Mangmi Air Y and Air Y Pro, the volume down button is the button under the volume wheel.

=== Configure the device model ===
The following message can appear.

You have to tell to openabl which device you are running.
You can use only volume up/down button to navigate and power button to validate.

{{::openabl_device_not_set.jpg?300|}}

Go on the line "Device model" and select yours. Mangmi Air Y in the example.

{{::openabl_set_device.jpg?300|}}

=== Configure to boot on linux ===
In the OpenAbl menu, select linux on Boot mode. Then go on start linux.

{{::openabl_boot_mode.jpg?300|}}

=== Insert the sdcard ===
Insert the batocera.linux sdcard into the device.

=== Play batocera.linux ===
As usual.

=== Boot Android ===
In the OpenAbl menu, select Android on Boot mode. Then go on start Android.